- 26mm think
- Front panel maximum temperature 120 degrees
- 2 Integrated thermal safely switches
- Thermal Insulation. Minimises heat radiated from the back and so more heat is radiated from the front. 12mm rear insulation to reduce background temperature. Rear Panel – Galvanised metal casing 16mm, maximum temperature 50 degrees after 4 hours of continues operation
- 1.9 m cable
Designed for the Bathroom
IPx4 Splash proof
Tailored for the bathroom, the heater features a dual heating system.
The panel is divided from top to bottom. The top is the room heating zone. The bottom is adapted for towel drying. The main impact of this is the top of the heater is warmer and provides more heat into the room.
Then the bottom is cooler and safer if you touch the panel when adding or removing towels.
Comfortable and Silent Heating
We like our home to be constantly comfortable without have to think about the heating.
Your heating system should warm the room quickly when needed. Then maintain that level of comfort, so you can sit back and relax. This is provided by our Welltherm infrared heaters.
One thing customers immediately point out is the feeling when stood near the heater.
Unlike normal electric heaters, infrared heaters emit infrared waves from the front panel. Creating a similar feeling to the heat from the sun. This a stand out feature often reported by customers.
Furthermore, infrared heaters don’t produce a dry air feeling and are completely silent when in operation.
More Heat Effective
ESHC technology is what sets Welltherm’s infrared heater’s apart from the rest.
However, not all infrared heaters are created equal. The problem with the majority of infrared heaters is that they do not work as intended. The heating panels do not get hot enough to emit truly effective infrared waves. This means they are essentially just a hot plate on the wall. Not providing the true infrared effect.
ESHC technology is what sets Welltherm’s infrared heater’s apart from the rest. Most competitors panels have a maximum surface temperature around 90°C, whereas Welltherm’s is 120 °C. Resulting in a stronger and more effective infrared effect.
Welltherm’s research and development has lead to technological advancements, making their heaters some of the most energy efficient on the market. Welltherm’s use ESHC technology, to ensure intrinsic heating across the panel. With ESCH technology more than 70 % of the heater’s heating surface is covered by heating conductors. This results in excellent heat distribution and efficiency. For most other infrared products this value is between 6 % and 23 %. Basically, the larger the proportion of radiation of an infrared heating system, the more efficiently electrical energy will be turned into thermal heat.
For maximum quality and efficiency, the ESHC heating conductor’s geometry is made from highest-quality stainless steel. While reverse heating circuits reduce unwanted magnetic fields to a minimum. The heating elements front and back is surrounded by thermally resistant silicone insulation. The use of this leads to optimum heat transfer to the front of the infrared heater, with maximum safety. With an infrared heater, its important the heat is transferred into the front panel. Heat to the rear of the heater is simply waste. In order to reduce the loss of heat a thermally insulating mat is used to the rear of the panel.
Read more about ESCH here.
As infrared electric heaters primarily heat the objects and bodies in the room, they don’t create the dry air feeling typically associated with electric heaters – such as convector heaters. Also, they don’t produce turbulent air. Making infare heaters ideal for people asthma or other breathing problems.
Another health benefit of infrared heaters is Infrared heat radiation causes a drying of the walls. This leaves almost no chance for mould to grow.
Thermostat and Timer
The programmer’s in built 24/7 timer lets you decide when the heating is on. You can set 3 on off periods each day. As well as setting the required room temperatures, ensuring you’re using the radiator efficiently while keeping you comfortable. As the control unit is wireless, it can be wall mounted or sat on a mobile stand.
Models and Technical Info
Welltherm infrared radiators fit perfectly into any space and can be customised to suit your requirements.
The wall mounting mechanism provides a sturdy and secure fixture which can be adapted exactly to your needs.
We will be happy to advise you in selecting the right size radiator for your needs. So, please feel free to get in touch!
|Model||Power, W||Dimensions, mm||No of Rails||Weight, kg|
|BP*0660||660||600 x 1500 x 17||2||18.7|
|BP*0850||850||600 x 1800 x 17||3||23.3|
- Connection voltage: 230 V
- Surface temperature: 110-120 ° C
There are no reviews yet.